2015 Code Black Firmware Update
(This is for 2015 Code Black′s only. If this update is performed on any other camera, it will not be covered under warranty!)
NOTE: In order to optimize your camera usage, firmware updates are encouraged. This firmware update is designed to group each camera’s pictures together.
Download the Code Black firmware update below by right clicking on the link below. Save the link or target as will pop up and save it directly to the SD card
Save the .bin file to an unlocked SD card.
Remove the SD card from your computer.
LOCK the SD card and insert it into the camera. (To lock your SD card, it is that small switch on the upper left side of the SD card. Press the switch down and it will be locked.)
Switch the camera to the SETUP position, wait until the COVERT logo appears on the display screen(this completes the firmware update). Do not turn the camera’s power off while the upgrade is in process.
While the camera is still in setup mode, press the menu button. Then scroll over to the SYS tab. Under SYS tab scroll down until you see “Default Set”. Press OK. This will take you back to the main screen of the camera. You will see through the lens of the camera while looking at the display screen.
Turn the camera off and then take the SD card out of your camera and UNLOCK the SD card. (To unlock your SD card, press that small switch on the upper left side up and it will be unlocked.)