2014 3G Code Black Firmware Update
NOTE: In order to optimize your camera usage, firmware updates are encouraged. This firmware update is designed to correct whiteout pictures, extend battery life and reduce error of camera malfunction.
- (This is ONLY for the 2014 3G Code Black’s)
- This is for 2014 3G Code Blacks only with the FIRMWARE VERSION of V3.00.22 or V3.00.24.
- If your Firmware Version is V3.00.25.08 OR V3.00.25.10, then you DO NOT need the firmware update.
- If this update is performed on any other camera, it will not be covered under warranty!
Download the 2014 Code Black 3G firmware update version V3.00.25.08 below.
Save the .bin file and the UOV.exe file below to an unlocked SD card.
2014 3G Firmware Update V3.00.25.08 download
2014 3G UOV Setup File Update 4.04A download
Take the SD card out of the computer.
LOCK the SD card and insert it into the camera. (To lock your SD card, it is that small switch on the upper left side of the SD card. Press the switch down and it will be locked.)
Switch the camera to the SETUP position, wait until the COVERT logo appears on the display screen(this completes the firmware update). Do not turn the camera’s power off while the upgrade is in process.
While the camera is still on setup mode, press the menu button. Then scroll over to the SYS tab. Under that tab scroll down until you see “Default”. Press OK. This will take you back to the main screen of the camera. You will see through the lens of the camera. You may then take the SD card out of your camera and UNLOCK the SD card. (To unlock your SD card, press that small switch on the upper left side up and it will be unlocked.)
Put the unlocked SD card back into the computer and setup your camera with the UOV setup or complete the setup straight from the camera. Make sure you go to the NET tab and turn your send mode to instant. Change your max number back to zero for unlimited messages and press OK.